Guestbook

 
Write an entry
 

Very nice site!

 

Very nice site! cheap goods http://oieypxa2.com/oryaqyr/4.html

 

Very nice site! [url=http://oieypxa2.com/oryaqyr/2.html]cheap goods[/url]

 

Very nice site! cheap goods

 

Dick 1905

Hi I've just finished buying all the currant 1905 range I love the knives, could you tell me if your planning on bringing out a meat cleaver in this range. Thank you Tony

Answer from Friedr. Dick & Co. KG:
Dear Tony,

We are happy to hear that you like our 1905 series.
Currently, a cleaver is not planned, but we'll pass on your proposal to our development department.
Thank you!

Kind regards,

Your Friedr. Dick Team

 

Old knife sharpener

Hello. I have a an old knife sharpener that I cannot find anywhere (so far, anyways)on the internet. I would like to know more about. I was wondering if you had someone there that might know about your antique sharpeners. I believe it could be back from before the 1920's maybe? It's been in my family for at least 40 years. Thank you for your time.

Answer from Friedr. Dick & Co. KG:
Dear Amanda,

Unfortunately, we cannot provide information about your historic products.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen, Germany for questions regarding production period or general information about your product.

Good luck!

Kind regards,

Your Friedr. Dick Team

 

Hello, Who is your dealer in Singapore? I'm looking for Dick 1905 series knives

Answer from Friedr. Dick & Co. KG:
Dear Al,

Thank you very much for your message.
Depending on the product you need, please contact one of our partners in Singapore:

EPROMAS
17A Eastpoint Terrace
Kaki Bukit Road 3
SGP-415883 Singapore
Tel.: +65-6484 6346
Fax.: +65-6484 6347
e-mail: epromas@pacific.net.sg

or

Planet Kitchen
1 Everton Park # 01-29
SGP-081001 Singapore
Tel.: +65-62272836
Fax.: +65-62275916
e-mail:veronica@planetkitchen.com.sg

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

I like what you guys are up too. Such smart work and reporting! Carry on the excellent works guys Ive incorporated you guys to my blogroll. I think it'll improve the value of my website dddfgadcfcebeefk

 

REPRESENTANTE ESPAÑA.

Buenos días.

Me gustaría saber el contacto en España (representante) para recibir información sobre la posible comercialización de sus productos.

Un saludo.

Answer from Friedr. Dick & Co. KG:
Buenos días.
Gracias por su interes en nuestros productos.
Por favor contacta con:

SteelBlade S.L.
C/Padre Romano Nº 12, 2º IZ
02005 Albacete

Juan Carlos Lozano
Mov.: +34 622 931 304
Tel.: +34 967 522 267
Mail: J.C.Lozano@fdick.es

Un saludo,
Friedr. Dick GmbH & Co. KG

 

FILO DE LOS CUCHILLOS

Estimados,

Gracias por su anterior respuesta, pero quisiera saber algo mas acerca del filo de los cuchillos, como si el agua caliente a mas de 82°C, puede disminuir el filo de los cuchillos.

Gracias por su respuesta

Luis Antonio Venegas Vargas

Answer from Friedr. Dick & Co. KG:
Estimado Sr. Venegas,

Nuestros cuchillos profesionales para la industria de alimentacion estan comprobados hasta temperaturas de 120° Celsius.
Si se trata de agua sin detergentes no debe que tener ningun efecto negativo a las hojas de nuestros cuchillos.

Atentos saludos,
Friedr. Dick GmbH & Co. KG

 

disinfection of knives

Hello dear gentlemen,

I'm very happy to greet them and tell them about a question that I have regarding the disinfection of knives with hot water, it is recommended 82 ° C, but how long is enough? and if the heat affects the edge or steel knives?

thanking them for their response,

I take leave of you.

 

Esterilización con agua caliente

Estimados Srs.

Me es grato dirigirme a uds. para saludarles y a la vez preguntarles acerca de la desinfección de cuchillos con agua caliente, la consulta es cuanto tiempo debo de mantener dentro del agua caliente a 82 °C los cuchillos que Uds. fabrican para eliminar los microorganismos.

A la espera de su respuesta.

Saludos

Luis Antonio Venegas Vargas

Answer from Friedr. Dick & Co. KG:
Estimado Sr. Venegas,

Gracias por enviar su solicitut.
Por nuestro lado no hay problemas con la desinfección en agua de 82° Celsius.
El material de los cuchillos y chairas lo puede resistir este tratamiento.
La duración del proceso de la desinfección lo tiene que preguntar al producente del esterilizador.

Atentos saludos,
Friedr. Dick GmbH & Co. KG

 

Hello I bot rs 150 duo mashine 2 days ago I thing diamond wheel is too grit(220) for my knifes, I work in small meat factory so I need very sharp knife this mashine don't help me :( Where I can get diamond wheel for 100 or 120 grit propobly this grit much bether for my knifes.
Thnks!

Answer from Friedr. Dick & Co. KG:
Dear Donatas,

Thank you very much for your message.
Please tell us in which country you live in.
We can then give you the contact information of an authorized dealer in that country.

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Mr. Leuze

I am trying to reach Mr. Leuze. I'm an old friend from Johnson& Wales University. I have retired and would like to contact him.
Thank you

Answer from Friedr. Dick & Co. KG:
Dear Bill,

Thank you very much for your message.
Please send your message for Mr. Leuze per email: pm@dick.de
We will forward it directly to him.
Thank you very much!

Kind Regards,
Your Friedr. Dick Team

 

where can i get a prize on this machines?

Answer from Friedr. Dick & Co. KG:
Dear Hansie,

Thank you very much for your message.
Please tell us in which country you live in.
We can then give you the contact information of an authorized dealer in that country.

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Lima per zigrinare piatta Art. No. 10410000

hello, I would like to order the flat file for checkering number 10410000.
How can I do?

Answer from Friedr. Dick & Co. KG:
Dear Jose,

Thank you very much for your message.
We will forward your request to our sales team.
They will contact you as soon as possible.

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Oyster knife failed

Just used your high carbon no-stain oyster knife for the first time, only to have the tip bend horribly. Let me know if you'd like a photo. (I have several other oyster knives that all perform well.)
Bruce

Answer from Friedr. Dick & Co. KG:
Dear Bruce,

Thank you very much for your message.
We are very sorry for the bad experience you had with our oyster knife.
This is the first complain we have about that product.
Could you please send a picture of the knife as well as your complete contact information per email using the following address:
pm@dick.de

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Boa tarde,

Gostaria de saber como posso adquirir facas da gama prodynamic, sendo eu do norte de Portugal.

Queria fazer um estojo, pois já conheço as facas e são realmente muito boas.

Cumprimentos,
José Calor

Answer from Friedr. Dick & Co. KG:
Dear Jose,

Thank you very much for your message.
Please contact our partner in Portugal:

BOGIMA-Representações, Importação e Exportação, Lda.
Complexo Industrial de Vialonga
Arm. C 18 Granja
2626-501 Vialonga
Tel: 21 973 75 60

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

saludos desde Cuernavaca,Morelos Mexico estoy interesado en varios de sus productos para carniceria como puedo adquirirlos, espero su respuesta por su atencion gracias

Answer from Friedr. Dick & Co. KG:
Buenos días Gabriel,

Muchas gracias por Su mensaje.
Para comprar nuestros productos en Mexico favor de ponerse en contacto con:

Herramientas de Filo SA de CV
Cauce No. 26
Col. Parques del Pedregal
14010 Mexico D.F.
Tel. +52 55 56591138
herramientasdefilo@prodigy.net.mx

o

Danfei de México S.A. de C.V.
Reynolds Aluminio No. 20
Colonia Vista Hermosa
54080 Tlalnepantla
Tel. +52 55 5365 9830
jgarcia@danfei.com.mx

Muchas gracias y muchos saludos desde Deizisau, Alemania
Su equipo de Friedr. Dick

 

is their any way i can study the types of cuts you guys make in a honing steel like a book or web site.

Answer from Friedr. Dick & Co. KG:
Dear Fernando,

Thank you again for your message.
No there is no such video. We have special tools for that, which we have developed by ourselves.

Thank you for your understanding!
Kind Regards,
Your Friedr. Dick Team

 

is their any way to studying the tip of cuts your honing steels have and how they are made. any videos

 

Hallo haben Sie Export nach Bulgarien -Wit koennen Transport Ihnen anbieten

Guten Tag ,
Wir sind Spedition und Transport Firma,
Koennen Wir email Kontakten von Ihrer Logisitk Abtelung erhalten?

Haben Sie Ladungen nach Bulagrien?

MFG /
Blagovest Todorov
BULSPEDTRADE-SOFIA LTD
Dipl.Spediteure
Skype- Blago.bulspedtrade.GmbH
tel: +359 2 9305076
fax: +359 2 9800406
sofia@bulspedtrade.com
22A,Stamboliiski Blvd.,fl.2
1000 Sofia, Bulgaria
URL: http://www.bulspedtrade.com
BULSPEDTRADE-SOFIA Ltd

Answer from Friedr. Dick & Co. KG:
Guten Tag,

vielen Dank für diese Informationen.
Wir werden Ihr Angebot intern weiterleiten.

Vielen Dank und viele Grüße aus Deizisau,

Ihr Friedr. Dick Team

 

Dick forever

Hallo liebe Sammler !
Als echter Koch (kein Fernsehkoch !!!) biete ich eine ganz gut erhaltene Dick Fleischgabel von 1963 im Tausch gegen eine NEUE......
Frohes Fest
Joachim

Answer from Friedr. Dick & Co. KG:
Hallo Joachim,

Bitte sende uns ein Foto der Gabel an pm@dick.de.
Wir prüfen dann deine Anfrage.

Vielen Dank und viele Grüße aus Deizisau,

Ihr Friedr. Dick Team

 

Dealer/shop in Luxembourg

Hello,

Do you have a dealer/shop in Luxembourg? If not, where is the closest shop?

What knife would you recommend for prosciutto which is little bit more dry than Italian one? Would you suggest one with or without Kullenschliff? Which sharpener would you recommend for that knife?

Thank you,
M

Answer from Friedr. Dick & Co. KG:
Dear Mario,

Thank you very much for your message.
Please contact our partner in Luxembourg:

Palais de l´Outillage
H. Faber
13, rue Jos.Junck
LU - 1021 Luxemburg
Tel.: 00352-484792
Fax.: 00352-402735
e-mail: palaisoutillage@pt.lu

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Agent ,reseller

Hello!
Do you have any agent or dealer in Sweden?
I might want to start selling your knife grinders precisely because they are so professional.
Regards Bjorn Nilsson
Oxelosund
Sweden

Answer from Friedr. Dick & Co. KG:
Dear Bjorn Nilsson,

Thank you very much for your message.
Please contact our partner in Sweden. They will give you all the information you need.

CanTec
Bertil Svensson
Bidevindsgatan 7
SE-65221 Karlstad
Tel.: 0046-54851115
Fax.: 0046-54-851111
e-mail: mail@cantec.se

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

BOLSA MALETIN DE COCINERO TEXTIL SIN CONTENIDO

REF. 81010000-01
ESTOY INTERESADA EN SABER EL PRECIO DE ESTE ARTICULO.
SI TENGO QUE ADQUIRIRLO A TRAVES DE INTERNET, HAY DISTRIBUIDOR O TIENDA AL PUBLICO EN ESPAÑA, ETC.
ATENTAMENTE

ALEXIA G.R.

Answer from Friedr. Dick & Co. KG:
Estimada Alexia,

Gracias por su interes en nuestros productos.
Por favor ponganse en contacto con nuestro comercial en España.

STEEL BLADE S.L.
P. Empresarial Campollano, C/ H, 2
02007. Albacete (España)
Mov: +34 622 931 304
Tel: +34 967 522 267

Muchos Saludos desde Deizisau, Alemania.
Su equipo de Friedr. Dick

 

How much is it

I have a blade I got from my company that just shut down and they gave me the blade of this saw and it's a dick blade so here's what's on the blade it in perfect condition so I want to sell it cause I have no use for it so here's the info

Dick
Hss
275x3x30
50827512w

Answer from Friedr. Dick & Co. KG:
Dear Glenn,

Thank you for your message.
Unfortunately, we do not buy products back, no matter if they are new or used.
We appreciate your understanding.

Kind Regards,
Your Friedr. Dick Team

 

what is the is best steel for a boning knife brand name victorinox that you guys have.

Answer from Friedr. Dick & Co. KG:
Dear fernando,

Thanks again for your message.
You can use our DICKORON classic, Item No. 75981300 (round) or 75983300 (oval)
http://www.dick.de/en/tools-for-chefs-and-butchers/sharpening-steels/the-dickoron-family/

Kind Regards,
Your Friedr. Dick Team

 

Can you resend the pic again i did'nt get it thank you.

Answer from Friedr. Dick & Co. KG:
Dear fernando,

Thanks again for your message.
We have resent the picture. Be sure to also check the spam-folder.
It could have ended up in there.

Kind Regards,
Your Friedr. Dick Team

 

is their any video explaining the cuts in a steel by hand sanding and how to hold the steel to make the land straight or how to rotate the steel.

Answer from Friedr. Dick & Co. KG:
Dear fernando,

Thanks again for your message.
I have sent you a picture via email.
We hope the information is what you need.
As you know we do not recommend putting the cuts in by yourself, therefore we do not have a video on that.

Kind Regards,
Your Friedr. Dick Team

 

what way is the best grip or direction to make the lines in the honing steel with sandpaper i know a couple of people that are very good at sanding their steel and it just takes them less then a minute or two and it can last them about 3 weeks without retouching it again. is their any way you guys can help or any website that is willing to talk about the cuts that are suppose to be in the steel and if those cuts are not on their it will not work properly.i would like to be enlighten with that knowledge so i can work comfortable with the steels that the company provides which is the f.dick polished packing house steel magnetic.

Answer from Friedr. Dick & Co. KG:
Dear fernando,

Thanks again for your message.
Depending on the coarseness or fineness of the sharpening steel cut, a certain surface roughness
of the sharpened cutting edge is obtained. This more or less significant surface roughness results
from the grooves that get created during sharpening. If the sharpening on steel is correct, the
grooves run lateral to the cutting edge. On the cutting edge itself, where the grooves coincide from
the two side surfaces, depending on the groove depth, a more or less significantly toothed (saw
toothed) cutting edge line is formed.
The cutting edge line desired may be one that is as smooth as possible or also a somewhat rough
cutting edge line. This depends on the intended use of the knife. A toothed cutting edge penetrates
more easily into the surface of a "hard" material (such as the skin of fruit and vegetables, bread,
crackling etc.) than a smooth edge. When penetrating a smooth material, a smooth as possible
and thin cutting edge is desired and give you an outstanding feeling for cutting.

If you have any further questions, you can also send us an email (pm@dick.de).

Kind Regards,
Your Friedr. Dick Team

 

what is the best liquid solution to clean the packing house i will really appreciate it thank you.

Answer from Friedr. Dick & Co. KG:
Dear Fernando,

Thanks again for your message.
We can recomend the following concering the cleaning of our ahrpening steels:
Sterilizers up to 120 °C (248 °F) are well suitable for cleaning your sharpening steel. But keep in
mind that, nevertheless, you should follow the instructions for use of the machine manufacturer.
We recommend cleaning with a mild alkaline cleaning agent! Do not use acid media in any case.
The right dosage of the cleanser is very important. Most of them have to be diluted in ratio of
1:100. Follow the instructions for use on the cleaning agent!
Manufacturers often recommend a cleaning period up to 20 minutes – depending on the cleaner.
Here too: Follow the instructions on the cleaning agent!
The right cleaning temperature is also decisive. Most of all detergents are used at a temperature
between 20 °C (68 °F) and 60 °C (140 °F). Please observe the instructions for use on your
cleaning agent.
Having cleaned your sharpening steel, it is very important to remove the detergent completely from
it. Therefore, wash off the sharpening steel thoroughly and dry it with a soft, non-fussing cloth.
Store the sharpening steel in a dry place.

We hope that information will help to answer your questions.

Kind Regards,
Your Friedr. Dick Team

 

i was also wondering what would be the best cleaning agent to clean a packing house f.dick steel instead of soap and water and a Scotch Brite sponge.

 

i was wondering if i can get a personal professional video in the write way to make lines on a polished packing house steel.i work in a meat fabrication plant and i been having trouble for a couple of years. i would really appreciate it if i can get the support and opportunity to be a master at my job but learning from the best.

Answer from Friedr. Dick & Co. KG:
Dear Fernando,

Thank you very much again for your message.
The steel you think of is actually for setting up and honing a sharp, bent over edge.
However, we know that there are some people putting their own individual cut into the blade of the steel.
Please have a look at our website to find the peferct steel for your application an needs.
We do not recommend putting the cuts in by yourself.
Thank you very much for your understanding.

Kind Regards,
Your Friedr. Dick Team

 

i was wondering i you guys can show me what is the proper way to sand a packing house polished honing steel f.dick

Answer from Friedr. Dick & Co. KG:
Dear Fernando,

Thank you very much for your message.
We have different steels with all kinds of cuts available.
If you want to bring on the cuts by yourself, you can use aluminium oxide cloths with various grit options.
Depending on your own preferences.
Wrap the cloth around the blade of the steel near the handle and pull it towards the tip a few times.

Kind Regards,
Your Friedr. Dick Team

 

Cheers from Australia for making the best pig sticking knives in the world. Do you guys realise how much of a huge following you have over here?

Answer from Friedr. Dick & Co. KG:
Dear Shane,

Thank you so much!

Kind Regards,
Your Friedr. Dick Team

 

I have many f.dick steel an they all have a arrow pointing away from the handle I was given one I be leave to be old the arrow faces towards the handle what's this mean?

Answer from Friedr. Dick & Co. KG:
Dear Josh,

Thank you very much for your message.
Yes, the arrow has been the other way arround until the 1970s.

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Dear Sir/Madam,

Kindly provide us the contacts of your partner in India

We want to procure Circular Knives for our fish cutting operations

Awaiting your earliest possible reply on my concern

Regards
Ateequr Rahaman
Seahath Canning Company,Goa
India
+91-9886159889

Answer from Friedr. Dick & Co. KG:
Dear Ateequr Rahaman,

Thank you very much for your message.
Please contact our subsidiary. They will give you all the information you need.

von den Steinen GmbH & Co. KG
Hr. Stefan Raup
Mail: s.raup@vondensteinen.de
Phone: +49 (0) 21 91 / 88 43 - 21
Fax: +49 (0) 21 91 / 88 43 - 48

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Serbian market

Dear Sirs,
Please tell me who is the official partner of Serbia.

Best regards,

Nenad Dojcilovic

Answer from Friedr. Dick & Co. KG:
Dear Nenad Dojcilovic,

thank you very much for your message.
Please contact our partner in Serbia:

Kristal PP
Miroslav Djurdjevic
Kneza Milosa 42
XS-14000 Valjevo
Tel.: 00381-14233555
Fax.: 00381-14233555
e-mail: kristal_valjevo@hotmail.com

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Rasps

I would like to purchase about six rasps from you to be shipped to my home in Tasmania, Australia. Where can we order them from and we need to know prices plus shipping costs please?

Thank you

Josef

Answer from Friedr. Dick & Co. KG:
Dear Josef Rudolf,

Thank you very much for your message.
Please contact our partner in Melbourne:

Koodak Jewellers Supplies (VIC) Pty. Ltd
125 Swanston St., 4th Floor
Melbourne, 3000
Australia
Phone: 03 9654 5811
Fax: 03 9650 1835
www.koodak.com.au

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

Fuellrohre Art No90710000

Good monning!
I see this product from your website and I need to know the price. Please report me the price of this product.
Thank you.

Sincerely,
Enkhtuya from Mongolia

Answer from Friedr. Dick & Co. KG:
Dear Enkhtuya,

Thank you very much for your message.
Unfortunately we have no partner in Mongolia where you could buy the item.
Please contact our partner in Russia, maybe you can order it there:
www.nozhi-dick.ru

Kind regards,
Your Friedr. Dick Team

 

can grit cloth b used on the dickoron family steels? and if so what is recommended 120,220

Answer from Friedr. Dick & Co. KG:
Dear Sergio,

Our Dickoron steels have a sepecial galvanic coating.
We offer a unique selection of different cuts depending on the individual demands.
Therefore, you do not need to (and should not) use a grit cloth.

Kind regards,
Your Friedr. Dick Team

 

I live in the USA (Waterloo Iowa)

Answer from Friedr. Dick & Co. KG:
Dear Terrell,

Thanks again for your message.
Please contact our subsidiary in New York:

Friedr. Dick Corp.
Christy Smikle
33 Allen Boulevard
US-Farmingdale, N. Y. 11735
Tel.: 001-631-45 46 955
Fax.: 001-631-45 46 184
e-mail: christyssales@fdick.us

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

HELP

I work at a pork plant and the steels they provide don't last long and I talk to my follow up trainer and he gave me a book and I want to order items #7650330 #7920325 #7910330

Answer from Friedr. Dick & Co. KG:
Dear Terrell,

Thank you very much for your message.
Please tell us what country you live in so that we can name you a local dealer.

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

representative

Hello,
I am in the United States in TEXAS, can you please tell me the local sales representative name and phone number or email so that I may contact this person. I am a wholesale business that sells knives to restaurants and stores.

Thanks you

Answer from Friedr. Dick & Co. KG:
Dear Mimi,

thank you for your message.
Please contact Mr Steven Kurek, Phone: +1 (516) 721 0149

Thank you!
Kind Regards,
Your Friedr. Dick Team

 

order

Hi, I from Malta, I would like to buy some chefs knives sets.From where I can ordered?

Best wishes,
Yuri.

Answer from Friedr. Dick & Co. KG:
Dear Juri,

Thank you very much for your message.
Please contact our partner in Malta:

DI ROCCO Ltd.
Lucia Camillieri
Prince Albert Street
MT-Marsa HMR 17
Tel.: +356(0)2122-7344
Fax.: +356(0)2122-7345
e-mail: dirocco@waldonet.net.mt

Thank you!
Kind Regards,

Your Friedr. Dick Team

 

I like to enquire if the Dick Multicut steel (76504280) is suitable for knives with 61-62RC rating?

Answer from Friedr. Dick & Co. KG:
Dear Al,

Thank you for your massage.
Our sharpening steels are 66-67 HRC so they are suitable for your knives.

Kind regards,

Friedr. Dick GmbH & Co. KG

 

Dickoron oval polished sharpening steel

Hello again
Thankyou for replying so quickly. The company I purchased the steel from was called ATR Direct Ltd in Bristol England.
Once again thankyou for your time

Darren Gamble

Answer from Friedr. Dick & Co. KG:
Dear Darren,

please contact Ms Maguire:

McDonnells
Ann Maguire
19-20 Blackhall Street
IE-Dublin 7
Tel.: 00353-1-6778123
Fax.: 00353-1-6774491
e-mail: maguirea@mcdonnells.ie

We will inform her that you will be contacting her.
Kind regards,

Friedr. Dick GmbH & Co. KG

 

Dickoron oval polished sharpening steel

hello
I Have a problem with my dick sharpening steel which I purchased last June. it has started to lose its coating in places and the handle keeps coming off. I tried to get it replaced as it is still under guarantee but the company has gone into liquidation. can you help?
Many thanks

Darren Gamble

Answer from Friedr. Dick & Co. KG:
Dear Darren,

Thank you for your message.
Where did you buy your sharpening steel? (Company and Country?)

Kind Regards,
Your Friedr. Dick Team

 

Hi,

Could you please send me contact for Your dealer in Croatia, I need some spare parts for catle stunnig device (spring)...

Thanks
Josip

Answer from Friedr. Dick & Co. KG:
Dear Josip,

Thank you very much for your message.
Please contact our partner in Croatia:

Manal
Zvonko Komljenovic
Velimira Skorpika 1a
HR-10090 Zagreb
Tel.: 00385-1-34 66 401
Fax.: 00385-1-34 66 404
e-mail: Zvonko@manal.hr

Thank you!
Kind Regards,

Your Friedr. Dick Team

 

Order an item

Hi, I'm from Malaysia. I want to buy a plastic filling tube which is a spare part for your table sausage fillers. Can I know how much is the price, how long would it take for the product to arrive and how to order it? Thanks :)

Answer from Friedr. Dick & Co. KG:
Dear Yuen Chang Chong,

Thank you very much for your message.
Please contact our partner in Malaysia:

LAZULI SDN BHD
Nina Chuah
19, Jalan SS 5A/11, Kelana Jaya, Selangor Darul Ehsan
MY- 47301 Petaling Jaya, Selangor
Tel.: +60-3-78749244
Fax.: +60-3-78758637
e-mail: nina@lazulisb.com.my

Thank you!
Kind Regards,

Your Friedr. Dick Team

 

f dick steel

hi i have found a f dick steel N R 179 and A4 50 11 37
could you plese tell me how old it is thanks for your time

Answer from Friedr. Dick & Co. KG:
Dear David,

Unfortunately, we cannot provide information about your historic products.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen, Germany for questions regarding production period or general information about your product.

Good luck!

Kind regards,

Your Friedr. Dick Team

 

Rapid Steel Action

Dear Friedr. Dick Team,

could you tell me if your Rapid Steel Action sharpener is suitable for sharpening Asian-type knives with their narrower edge ?

Oh, and if you could write contact info for your partner/distributor for Slovenia, please.

Thanks in advance
Danijel

Answer from Friedr. Dick & Co. KG:
Dear Danijel,

thank you for your question.
If your knife is grinded on both sides of the blade, our Rapid steel is suitable.

Please apply to our partner in Slovenia for further information:

Importex
Mr. Sebastjan Felser
Brunska Gora 13/a
SI-1433 Radece
Tel.: 00386-3-56 87 860
Fax.: 00386-3-56 87 861
e-mail: importex@importex.si

Thank you!
Kind regards,

Your Friedr. Dick Team

 

Hi
I looking for parts for F dick SM-110 knife sharpener. who or where can I get parts for this unit?
With in the USA.

Thank you,
Nelson

Answer from Friedr. Dick & Co. KG:
Dear Nelson,

please contact our subsidiary in New York:

Friedr. Dick Corp.
33 Allen Blvd.
Farmingdale, NY 11735
Tel: 1-800-554-3425
Fax: 1-631-454-6184
E-Mail: customerservice@fdick.us

Thank you!
Kind regards,

Your Friedr. Dick Team

 

Hi regards below explain stamp as only 4 numbers how does this translate to year and month etc
Thanks
John


Hi
Can you supply info on butchers steels. I note some f dick steels have numbers stamped on shaft that runs up the centre of the handle I think it is month/year of manufacture?
Info please or who may be able to help
Thanks
Mark

Answer from Friedr. Dick & Co. KG:
Dear William,

this number is the date of production.
We hope that helps you.

Kind Regards,

Your Friedr. Dick Team

Answer from Friedr. Dick & Co. KG:
Dear John,

The number is a internal code. So if you want to know when your steel was manufactured, please send the number to m.triebe@dick.de and I will check the production date for you.

Kind Regards,

Your Friedr. Dick Team

 

sharpening steels

Hi
Can you supply info on butchers steels. I note some f dick steels have numbers stamped on shaft that runs up the centre of the handle I think it is month/year of manufacture?
Info please or who may be able to help
Thanks
Mark

Answer from Friedr. Dick & Co. KG:
Dear William,

this number is the date of production.
We hope that helps you.

Kind Regards,

Your Friedr. Dick Team

 

uk dealers

please could you give me the contact details of you uk dealer.

Answer from Friedr. Dick & Co. KG:
Dear Darren,

Thank you for your message.
Please contact our Partner in the UK:

for chefs knives please have a look at:
www.nisbets.co.uk

If you should not find what you need there please contact:

McDonnells
Ann Maguire
19-20 Blackhall Street
IE-Dublin 7
Tel.: 00353-1-6778123
Fax.: 00353-1-6774491
e-mail: maguirea@mcdonnells.ie

Kind regards,

Your Friedr. Dick Team

 

dealer

hello,
please send me contact for Your dealer in Georgia...

Thanks in advance
meatana

Answer from Friedr. Dick & Co. KG:
Dear meatana,

Thank you for your message.
Please contact our Partner in Russia:

BEGARAT M-ZAO
Michail Sarychev
Michailowskij pr-d 3-13
RU-109029 Moskau
Tel.: +7-095-9562799
Fax.: +7-095-2705632
e-mail: vopros2012@begarat.ru
www.begarat.ru

If you should not find what you need please come back to us again.
Thank you!

Kind regards,

Your Friedr. Dick Team

 

Dealer in Serbia

Dear,
please send me contact for Your dealer in Serbia...

Thanks in advance
Ognjen

Answer from Friedr. Dick & Co. KG:
Dear Ognjen,

Thank you for your message.
Please contact our Serbian Partner:

Kristal
Miroslav Djurdjevic
Kneza Milosa 42
XS-14000 Valjevo
Tel.: 00381-14233555
Fax.: 00381-14233555
e-mail: kristal_valjevo@hotmail.com

Kind regards,

Your Friedr. Dick Team

 

Viele Grüße aus Wiesbaden

Gerne hinterlassen auch wir einen schönen Gruß und wünschen Ihrem gesamten Team weiterhin im Internetmarketing, viel Erfolg. Ebenso freuen wir uns über jeden Besuch auf unserer Webseite wo auch Sie eingetragen sind, unter: www.fleischportal.de

Ihr Fleischportal Team

 

Hello,
I have many of Dick knives and some of them are very old and very high quality.
I'am trying to find out how old some of them are. Can you tell me when did F.Dick start to add "Made in Germany" text on knives.

Thanks
Holer

Answer from Friedr. Dick & Co. KG:
Dear Holer,

unfortunately, we cannot provide information about your historic products.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Good luck!

Kind regards,

Your Friedr. Dick Team

 

Sonderwünsche erwünscht?????

Hallo,

In der Messerserie "Premier Plus" gibt es ein Tranchiermesser flexibel 21cm Wellenschliff.
Könnt ihr das Messer auch als 1905er Serie machen??

ist doch bald Weihnachten

lieben Gruß aus münchen

l

Answer from Friedr. Dick & Co. KG:
Hallo Michael,

vielen Dank für den Hinweis, wir werden die Anregung intern weiterverfolgen und in unseren Ideenspeicher aufnehmen.
Wir wünschen weiterhin viel Spaß mit unseren Messern!

Viele Grüße aus Deizisau,

Ihr Friedr. Dick Team

 

Distributor for Sausage Stuffer in Montreal, Canada

Hello,

Please provide information where I can purchase a Home Slaughtering Sausage Filler in Montreal, or elswhere in canada or even in the USA.

Thanks
René Gagnon
25 september 2012

Answer from Friedr. Dick & Co. KG:
Dear Rene,

Please contact our Canadian Partner:

Food Supplies Distributing
Stephen Clark
355 Rayette Road, Unit 10
CA-Concord, Ont. L4K 2G2
Tel.: 001-905-669 2886
Fax.: 001-905-669 1671
e-mail: sclark@foodsupplies.ca

Kind regards,

Your Friedr. Dick Team

 

Please provide your distrubition contact information in Hong Kong.

Dear Gentleman/Madam,

Please provide your distrubition contact information in Hong Kong. We going to order your product.

Thank you,
Tosion Chu

Answer from Friedr. Dick & Co. KG:
Dear Tosion Chu,

Please contact:

Pantry Magic (HK) Ltd.
Unit 08 14/F – Block B
Ko Fai Road, Yau Tong 17
HK-Kowloon, Hongkong
Tel.: 00852-3694-0752
Fax : 00852-3694-0754
e-mail : robert@pantry-magic.com

Best regards,

Your Friedr. Dick Team

 

custom butchers knives

I have been using the master grip, curved stiff boning knives and breaking knives for some time now. I like the blade shape and the handles feel good in my hands. I am preparing to open a butcher shop where all of our work and equipment will be on display and would like to continue using your knives but need something with a more presentable handle. I like the the look of your nature and premiere series handles but you do not currently make my style of blade with these handles. Is it possible to get knives made like the ones I am describing?

Answer from Friedr. Dick & Co. KG:
Dear George,

Thank you for your comments on our MasterGrip series. We appreciate it. As the MasterGrip series is a special Butcher series, it has special blade types. Premier Plus und Premier Nature are Chef’s series with different types of blades. At the moment it is not planned to add Butcher blade types in our Chef’s series.

If you need assistance regarding your online shop, please turn to customerservice@fdick.us.

Best regards,

Your Friedr. Dick Team

 

Handle Repair?

I have a superb 10" F. Dick butcher knife about 50 years old, given to me by my father about 30 years ago and I have used it continuously since then. The blade is perfect, but is there anyone that could install a new handle? I prefer to keep it original.

Randy Randall
255 E. Sheldon St.
Prescott, AZ 86301
U. S. A.

928-776-0888

Answer from Friedr. Dick & Co. KG:
Dear Randy,

Thank you for your message. Unfortunately we are not able to repair the handle of your knife. We recommend to contact a carpenter. He can manufacture exactly what you need.

Best regards,

Your Friedr. Dick Team

 

Retailers near by????

I am interested on 1778 series, chef's knife No. III. Most good looking knife. Im a chef @ italian restaurant OSTERIA COPPA. San mateo, california. Where to buy???

Answer from Friedr. Dick & Co. KG:
Dear Josue,

Please contact customerservice@fdick.us They will give you a dealer's address.

Kind regards,

Your Friedr. Dick Team

 

dealer of DICK in malaysia

Hi Sir, could you please inform me the DICK product dealer in Malysia. I am interested in buying and having some . tq

Answer from Friedr. Dick & Co. KG:
Dear Che Omar,

Please contact the following companies:

Pastry Pro SDN. BHD.
Sani Ong Hock Lai
8, Jalan 3/37A, Industrial Area
Taman Bukit Maluri Kepong
MY – 52100 Kuala Lumpur
Tel.: +603 62721155
Fax :+603 62721188
saniong@pastrypro.com.my

or

LAZULI SDN BHD
Nina Chuah
19, Jalan SS 5A/11, Kelana Jaya, Selangor Darul Ehsan
MY- 47301 Petaling Jaya, Selangor
Tel.: +60-3-78749244
Fax.: +60-3-78758637
e-mail: lazulisb@streamyx.com

Thank you and best regards,

Your Friedr. Dick Team

 

Dealer in Saudi Arabia or midle east

Dear receiver,

I'm really interested in your knives sets (chef sets). can you please let me know if you have a dealer in Saudi Arabia or in the middle east to contact him.

Thanks

Answer from Friedr. Dick & Co. KG:
Dear Ahmed,

Please contact:

SAVICO
Vladimir Savic
P.O. Box. 9429
UAE-Sharjah
Tel.: +971-6-5573401
Fax.: +971-6-5573403
e-mail: vladimir.savic@savico-online.com

Best regards,

Your Friedr. Dick Team

 

Chef Knives

Have tried every brand of knife from the generics to the best German and Japanese knives out there. Recently purchased several F. Dick knives. The 1905 series 6" chef knife and the 8.5" HACCP series (green Handle) I'm really blown away by the quality of these knives. Sturdy throughout the entire knife. Holds an edge like no other knife I've owned before and the balance for a heavier knife is untouched by anyone else. I'm complete sold on the brand and will only purchase and recommend F. Dick knives from here on out.
Thank you...
Chef Chris Burghart

 

dealer in Taiwan

Please advice me the information of your dealer in Taiwan. I am interested in purchasing a chef knife from you. Thank you!

Answer from Friedr. Dick & Co. KG:
Dear Kunshun,

our partner in Taiwan is:

LEE MOW TRADING
Yiu Ing Chang-Huang
52, Kaifeng St., Sec 2
TW -Taipei / Taiwan R.O.C.
Tel.: 00886-2-23315492
Fax.: 00886-2-23754975
e-mail: leemowtrading@yahoo.com.tw

Best Regards,

Your Friedr. Dick Team

 

Good Day,
I'am a traditional fine furniture maker based in Perth, Western Australia. I've owned and used your wonderful rasp over the years,and would love to know who my local dealer in Australia is?
kind regards,
Rupert Eachells
tel 0412999028
ehttp://exceptionalfinefurniture.com

Answer from Friedr. Dick & Co. KG:
Dear Rupert,

Thank you for your request. Our partner in Australia is as follows:

Koodak Jewellers Supplies (VIC) Pty. Ltd.
125 Swanston St., 4th Fl.
MELBOURNE, 3000
Tel: +61 (03) 9654 5811
gabrielr@netspace.net.au
www.koodak.com.au

Kind regards,

Your Friedr. Dick Team

 

old steele

I brought old steele with the aarow pointed back to the handle without make in germany on it what years? do you think it is

Answer from Friedr. Dick & Co. KG:
Dear Michael,

Unfortunately, we cannot provide information about your historic product.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Best regards,

Your Friedr. Dick Team

 

Hello. I whonder if i can order direct from you kebabknives to my store?

Answer from Friedr. Dick & Co. KG:
Dear Alex,

Thank you for your comments! We really appreciate it.

Please use the contact form (http://www.dick.de/en/contact.php) for finding your local dealer, giving us the following information – What is your country and postcode? We will send you a message telling you where to find your local dealer.

Thank you and best regards,

Your Friedr. Dick Team

 

Good morning.
I have a Dick, stunning slaughter cattle devise No of product VSG-9LC.
I bought it 4 years ago from a local retailer in the island of Crete.
Now I can not find bullets for that in Greece.
Do you have any advise where to find some?
Best regards
Tassos Gourgouras

Answer from Friedr. Dick & Co. KG:
Dear Tassos,

We do not deliver the cartridges any longer. Please turn to the following address to find a local dealer:

http://www.ruag.com/Group/Contact/Contactform

Thank you and best regards,

Your Friedr. Dick Team

 

old knife

I am 57 years old was given a knife by my grandfather .Has the arrow says F DICK No66 12" .how old is it?

Answer from Friedr. Dick & Co. KG:
Dear Dennis,

Unfortunately, we cannot provide information about your historic product.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Best regards,

Your Friedr. Dick Team

 

Online Shop

Dear Sir,hello from Heraklion Crete,Greece.
Can you inform me some online europe shops for your knifes?
Best Regards
Aristidis Kritsotakis.

Answer from Friedr. Dick & Co. KG:
Dear Aristidis,

Our partner in Greece will send you the prices and further information. Please turn to:

SIVVAS S.A.
Thomas Sivvas
1 Glinou Str.
GR - 543 53 THESSALONIKI
Tel.: 0030-2310-94 88 51
Fax.: 0030-2310-94 88 52
e-mail: sivvas@otenet.gr

Thank you and best regards,

Your Friedr. Dick Team

 

hello, I am from Bulgaria and I am interested from your product RS-75 & RS-150 DuoFast sharpening (and honing) and I want to know how much does it coast?

Answer from Friedr. Dick & Co. KG:
Dear Mery,

Our partner in Bulgaria will send you the prices and further information. Please turn to:

Tsvetko Georgiev & Sohn GmbH
ul. Knjaz Boris I, 155
1202 Sofia
solingen@unitednetworx.com
Tel: 00359-2-9831702

Thank you and best regards,

Your Friedr. Dick Team

 

Hello,

Currently i am a student at Johnson & Wales Univerisity in Providence, Rhode Island, USA. Being a part of the foodservice industry now for over 7 years, i've held many a knife that i just could'nt stand to use. When i enrolled in J&W Culinary School, we were issued a set of knives that your company produced and they are the most comfortable cutlery i have ever used. The re-designed handles of the Premier Line fit "like a glove" in oversized hands. Unfortunately, the only downfall to these knives are they are not available in retail shops in the USA. However, i do not mind paying the extra price for shipping for not only the best knives i've ever used, but the craftsmanship and history your company puts into each piece of work that lack in other competitors.


Thank You.

Answer from Friedr. Dick & Co. KG:
Dear Alexander,

Thank you for your comments! We really appreciate it.

Please use the contact form (http://www.dick.de/en/contact.php) for finding your local dealer, giving us the following information – What is your country and postcode? We will send you a message telling you where to find your local dealer.

Thank you and best regards,

Your Friedr. Dick Team

 

how to order

I used a couple of your ergo knives just recently and I liked them. How do I order from you

Answer from Friedr. Dick & Co. KG:
Dear Brian

Please use the contact form for finding your local dealer, giving us the following information – What is your country and postcode? We will send you a message telling you where to find your local dealer.

Thank you and best regards,

Your Friedr. Dick Team

 

vintage f dick sausage stuffer ?

Hi,
I have aquired a 9 liter, manual f dick sausage stuffer. It was origionally red in color. I would like to find out more about it. Is there an e-mail address I could send a picture and get more information?

Thank you,
Susan

Answer from Friedr. Dick & Co. KG:
Dear Susan,

Unfortunately, we cannot provide information about your historic product.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Best regards,

Your Friedr. Dick Team

 

TWF-EL15 nr. 000010

I bought three years ago a TWF-EL15 sausage stuffer and I have been very disappointed with it's performance. First the limit stop did not work properly on the down stroke and the piston broke. It cost me a new piston and $90.00 labor to have the limit stop repaired.

Now the Rack shaft part number 90511330 745x40x20 bent while stuffing breakfast sausages and a new shaft just cost me $501.00 with shipping.

I could only find a new shaft from Twin-Supply in the US and they said this part is discontinued but had one left so I feel they took advantage of me by over charging.

I feel your company should make good on this as I bought dick product thinking I was buying the best. So for that has not been the case. Thank you for your time. Dennis St. John

 

Kochmützenquiz

Vielen lieben Dank für meinen Kochmützenquiz-Gewinn, das außergewöhnlich, wunderschöne Kochmesser der Design-Serie 1905 , gespickt mit Scharfsinn, gepudert mit einem Hauch Elleganz und gewürzt mit einer Prise Extraklasse!
Mit ganz lieben Grüßen aus Günzburg
Andreas Goßner blank

 

Catalogue

Hi! I wonder how I could have your catalogue with prices for all products. please let me know. really thanks bye andrea

Answer from Friedr. Dick & Co. KG:
Dear Andrea,

our catalogue can be downloaded on our website: http://www.dick.de/en/catalogues_download.php

Please use the contact form for enquiries, giving us the following information – What product are you interested in? And what is your country and postcode? We will send you a message telling you where to find your local dealer.

Thank you and best regards,

Your Friedr. Dick Team

 

hallo,
ich habe eben ihre seite mal so schnell überflogen und finde sie sehr ansprechend, farblich ist ihre homepage auch sehr schön abgestimmt.
P.S. weiter so :)

LG

 

Dick Steel

Dear Sir , a friend of mine has an old Dick steel , the steel is fitted with a brass bulls head above the finger guard, would you have any information regarding the years when this particular model was manufactured , kind regards Philip Ackley GM Inst M

Answer from Friedr. Dick & Co. KG:
Dear Philip,

Unfortunately, we cannot provide information about your historic product.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Best regards,

Your Friedr. Dick Team

 

magneto steel

sehr geehrte damen und herren,

ein bekannter bekam von ihnen zum testen,einen magneto steel,welchen er mir ebenfalls zum testen gab.das ergebnis war sehr gut! nur kann ich leider keinen händler finden, der diesen messerschärfer vertreibt.
vielleichtz können sie mir weiter helfen?

mfg s. unger

Answer from Friedr. Dick & Co. KG:
Sehr geehrter Herr Unger,

Der Magneto Steel ist seit Mai 2011 im Fachhandel erhältlich. Gerne nennen wir Ihnen einen Händler bei Ihnen in der Nähe. Senden Sie uns dazu bitte eine E-Mail über das Kontaktformular und nennen Sie uns Ihre Postleitzahl.

Mit freundlichen Grüßen

Ihr Friedr. Dick Team

 

Hi im writing about one of ur products that i have come across in america.Its got a wood handle and only has two markings that i can read "made in germany"and "F. Dick II".I would like to send u a picture to see how old it is and if it has any monitary value.

Answer from Friedr. Dick & Co. KG:
Dear Clayton,

Unfortunately, we cannot provide information about your historic product.

We would therefore recommend that you contact a qualified antique dealer for questions regarding the value or the Blade Museum in Solingen for questions regarding production period or general information about your product.

Best regards,

Your Friedr. Dick Team

 

Danke schön...!

Vielen Dank an unseren großzügigen Sponsor für die Bereitstellung unseres Monatsgewinnes bei facebook-kochmützenquiz mit den freundlichsten Grüßen von allen Mitspielern und Verantwortliche..!
Andreas Goßner

Answer from Friedr. Dick & Co. KG:
Guten Tag, Herr Goßner,

gerne! Wir drücken allen Teilnehmern die Daumen und wünschen schon einmal viel Spaß mit dem Gewinn.

Mit freundlichen Grüßen

Ihr Friedr. Dick Team

 

Tax Free

Hi F.Dick Company.I am a student in Poland.We have a Knife Factory in Yatagan/Denizli/ TURKEY. I want to buy a machine from Dick which is called "RS-75 & RS-150 Duo" models.In addition I want to learn, is it possible to have tax free in your this models. On the other hand , Can ı give back %20 of the money ı paid ?? please write me soon ı am loking forward your reply

 

Tax Free

Hİ F.Dick Company.I am a student in Poland.We have a Knife Factory in Yatagan/Denizli/ TURKEY. I want to buy a machine from Dıck which is called "RS-75 & RS-150 Duo" models.In addition ı want to learn, is it possible to have tax free in your this models. On the other hand , Can ı give back %20 of my money ?? please write me soon ı am loking forward your reply

 

Righ tool for the righ task
Hi I am chef saucier for one of biggest Hotel in Los Angeles, California, also I had more 20 years in the cooking industria, I like to have all knives very sharp, also I used to have many brands, but the best brand that I have is F. dick and dickron steel is the best too keep sharp all my knives steel I have and I think is the best for this type task. I Really recomended to my co-workes, new chefs, and all people that is working in the industrial dickoron steel the best in the west. and congratulations for 75 years of service around fof the world.

 

Conocimientos

Estimados amigos Dick.

Me encuentro en busqueda de mejoras en mi linea de produccion y espero contar con ustedes y con la experiencia que tienen para que me puedan colaborar en la etapa de transicion en la que me encuentro, ya que debo romper algunos paradigmas sobre la utilizacion de cuchillos y afiladores.

Me mantendre en comunicacion con ustedes y espero poder recibir informacion sobre los usos y aplicaciones, mantenimiento y forma de trabajo con sus productos a nivel de matadero y salas de deshuese.

Atentamente,

 

Werkverkauf/Hausverkauf

Hallo!

Ich würde gerne wissen an welchen Tagen zur Zeit in Deizisau ein Werkverkauf stattfindet?

Viele Grüße

Answer from Friedr. Dick & Co. KG:
Guten Tag, Patrick,

unser Werksverkauf in Deizisau hat die folgenden Öffnungszeiten:

Donnerstag und Freitag: 14:00 Uhr bis 18:00 Uhr
Sonderöffnungszeiten an verkaufsoffenen Sonntagen in Deizisau von 13:00 Uhr bis 17:00 Uhr

Unter dem folgenden Link finden Sie weitere Informationen:

http://www.dick.de/de/ueberuns_fabrikverkauf.php

Mit freundlichen Grüßen

Ihr Friedr. Dick Team

 

Hallo ich nochmal ich hab leider die falsche Email addresse hingeschrieben !! Aber jetzt hab ich ja die richtige hingeschrieben!!

 

Ich hab mal eine sehr wichtige Frage!! Und zwar meine Arbeitskollegen haben gesagt das ich meine Dick Messer zum vorschleifen bringen sollte damit sie länger scharf bleiben! Könnt ihr mir helfen ?? Schreibt mir bitte eine Mail Dankeschön im vorraus!!

Answer from Friedr. Dick & Co. KG:
Guten Tag, Clemens,

unsere Messer werden im letzten Arbeitsschritt nochmals abgezogen und sind somit sofort einsatzbereit. Vor der ersten Verwendung ist es also nicht nötig die Messer zu schärfen. In der weiteren Benutzung der Messer empfehlen wir vor oder nach jedem Gebrauch die Messer zu schärfen, damit die Schneidleistung nicht nachlässt. Beim Gebrauch des Messers wird die Schneide stumpf. Sie verläuft dann, im Querschnitt betrachtet, nicht mehr spitz, sondern – mit bloßem Auge nicht erkennbar – leicht abgerundet. Die so abgenützte Schneide sollte sofort am Wetzstahl gewetzt werden. Nach häufigem Wetzen wird selbstverständlich der Schneidenwinkel von Mal zu Mal größer, also stumpfer. Dann ist das Stadium erreicht, bei dem ein Nachschleifen und Abziehen auf geeigneten Schärfmaschinen erforderlich wird.

Mit freundlichen Grüßen

Ihr Friedr. Dick Team

 

richiesta informazioni

Salve sarei interessato alla linea di ATTREZZI SPECIALI ma non sapendo i prezzi non saprei come orientarmi....chiedo pertanto che mi venga comunicato anche tramite mail il listino prezzi dei vari prodotti in questione. Cordiali saluti Mulas Raimondo.

 

Wieviel kostet die Messertasche mit Inhalt

L = 50 cm / B = 42 cm
Art.-Nr. Farbe Ausführung VE
81067000 schwarz bestückt 1

bitte schreiben sie mir eine E-mail zurück

Answer from Friedr. Dick & Co. KG:
Liebe Frau Friedrich,

wir verkaufen unsere Produkte nur über den Fachhandel. Bitte schauen Sie unter http://www.dick.de/de/koch-und-fleischerwerkzeuge/autorisierte-fach-einzelhaendler nach. Hier finden Sie unsere empfohlenen Online-Fachhändler, diese geben zu jedem Artikel einen Preis an.

Gerne empfehlen wir Ihnen einen Händler bei Ihnen in der Nähe. Senden Sie uns eine E-Mail über das Kontaktformular und nennen Sie uns Ihre Postleitzahl.

Mit freundlichen Grüßen

Ihr Friedr. Dick Team

 

Antic F.Dick sharpening steels

Hi F.Dick company.

Due to my work in the meat business I got interested in antic F.Dick sharpening steels.
I have a little collection now of steels which vary from very old to old.
The oldest steel is from 1910 I guess (seen in a old catalogue which was for sale on ebay).
My question is if there is any online information about the different time marks of the F.Dick sharpening steels,... any info is welcome.
Styles, materials,... etc. etc.
Some of my sharpening steels are here:

http://s195.photobucket.com/albums/z274/yankeebulls48/fdick2010/

Thanks already.
Grtz Wouter

 

Testsistema Belarus

Dear Sir/Madam.

We are quite a young prosperous company, based in Minsk , Belarus. We have been on the market for 7 years.
We would like to know whether it is possible to distribute your company's goods in our country as a dealer.
Our company deals with the sale of meat-processing equipment and laboratory equipment for milk and meat plants. By now, we have quite a lot of regular customers and organizations that are interested in our close collaboration with the aim of promoting your production on to our market. That is why our company is interested in all kinds of your goods.

We, the company "Testsistema" from Belarus, are looking for a manufacturer who can supply us with a wide range of your goods.
We are ready to answer all your questions and to start negotiations concerning our mutual co-operation.
Could you send us your latest catalogue, the price list and your contact phone number?

We look forward to further cooperation with you.

With best regards

Natalia Miller
Minsk
Belarus
+375293882516, +3750172422279,
e-mail: testsistema@mail.ru
Мой Мир@Mail.Ru в твоем мобильном!
ПроÑ�то зайди Ñ� телефона на m.mail.ru

 

I represent large food manufacture in Russia ( fish,sushi, salats). We want to work by your knifes for fish and Japanese cuisine. Do you have a partner in Russia? How can we order your products?
Best regards, Natalia

Answer from Friedr. Dick & Co. KG:
Dear Natalia,

Our partner in Russia is based near Moscow:
Begarat
Tel: +7(495) 926-25-20;
Fax: +7(495) 926-25-21
vopros2010@begarat.ru
www.begarat.ru

Best regards,

Your Friedr. Dick Team

 

kullenschliff / granton edge 12"inch butcher knifes

As a meat cutter clean cuts of meat are number one specialy when cutting big rounds and chucks we need F dick to put the kullenschliff on the 12 inch butcher knifes#8225300 #82385300 and on the 10 inch knifes i cant garantee to buy 1000 knifes but i can garantee that you will sell 10.000 to all the meat cutters who want better inovative products this might be the next best thing to boost the sales for your knifes it is so much easier to cut with the kullenschliff the blade dont stick as much to the meat it makes work easy please take this into consideration as i look forward to seeing it in your catalog Thank you

Answer from Friedr. Dick & Co. KG:
Dear Richard,

Thank you for your comment.

We have a wide product range of butcher knives with kullen in our SaniGrip line. Please refer to this link:
http://www.dick.de/en/tools-for-chefs-and-butchers/knives-and-ancillary-items-for-butchers/sanigrip-antibacterial-knife-series/

Best regards,

Your Friedr. Dick Team

 

new grip?

Hallo there!

Ive been working as a chef for many years the last 15 years as teacher in restaurant schools.
When a chef work proffesionel in kitchen they change grip all day long so i have nade a new shape of grip for all the chefs knives, my prototype based on a salmon knife. I hope you find it very interesting.
BRGDS Peder.

Answer from Friedr. Dick & Co. KG:
Dear Peder,

Please would you send us a drawing and more information on your new handle.

Please send it to: pm@dick.de

Thank you & best regards,

Your Friedr. Dick Team

 

Mit Dick , durchs Leben .

Hallo , seit mehr als 40 Jahren arbeite ich mit Zangen und Feilen der Firma Dick . Bin Esslinger und es kam bei mir nie was anderes auf den Arbeitstisch. Bin Goldschmiedemeister , seit 1982 in Köngen , selbständig und habe immer noch mein Werkzeug aus der Lehre ( 1967 )mit dem täglich gearbeitet wird .
Dieses Argument reicht eigentlich , oder ?
Ich sag einfach . Danke.
J. Sitensky

 

Messerqualität

Als Profi Schärfer habe ich sehr viele Messer von
verschiedenen Herstellern in meinen Händen.
Beim schärfen mit meinen eigenen zusammengestellten
Schärfwerkzeugen mußte ich feststellen, daß sich
die Messer von Dick sehr gut, schnell und wirklich
präzise schärfen lassen. Meine Kunden schätzen meine hohe Schärfkunst. Dick Messer kann ich bestens empfehlen, für Einsteiger oder für den Profi!

Viele Grüße aus Würzburg

Helmut Bonengel, Messerscharf
"Kochst Sie schon - oder schneiden Sie noch?"

 

Mentors.

My first Knives i remember were my Grand Mothers in Kirchheim Unter Teck from there Restaurant Gasthaus Zum Hirsch (Nabern)it was a steel and Knive made by Dick Knives, they stood the test of time.Do you have a Sales Representative in Western Canada?

Answer from Friedr. Dick & Co. KG:
Dear Siegfried,

Thank you for your request. Our partner in Canada is "Food Supplies" On their website you will find contact information: http://www.foodsupplies.ca/

If you need anything else, let us know.

Best regards,

Your Friedr. Dick Team!

 
Write an entry