Gravers and Punches

The most popular types of gravers are also available in HSS quality as well as carbide tipped. DICK gravers of tool steel (WS) and high speed steel (HSS) come in the right hardness and tempering for best performance. They retain their sharpness if they are carefully reground with plenty of water on an aluminim oxide disc (pink of medium hardness H-M, grain 50-80, depending on the required fineness of the ground surface). All DICK gravers of tool steel (tungsten, chromium and vanadium alloy) and of high speed steel are supplied both hardened and tempered ready for use. Considering their wide range of application, however, special requirements may call for different toughness.

Flat edge gravers No. 551

Flat edge gravers No. 551
Item No.sizeThickness of edge in mmpackagingunitThickness of back in mm
4055101010,2box10
4055102020,4box10
4055103030,6box10
4055104040,8box10
4055105051box10
4055106061,2box10
4055107071,4box10
4055108081,6box10
40551100102box10
40551120122,4box10
40551150153box10
40551200204box10
40557000box100,8
405570101box101,2
405570202box101,6
405570303box102

Round edge gravers No. 552

Round edge gravers No. 552
Item No.sizeThickness of edge in mmpackagingunitThickness of back in mm
4055201010,2box10
4055202020,4box10
4055203030,6box10
4055204040,8box10
4055205051box10
4055206061,2box10
4055208081,6box10
40552100102box10
40553000box101,5
405530101box101,75
405530202box102
405530303box102,25
405530404box102,5
405530505box102,75
405530606box103

Oval gravers No. 556

Oval gravers No. 556
Item No.sizeheightwidthpackagingunit
4055602023,7mm1,7mmbox10
4055604044,5mm2,1mmbox10
4055606065,3mm2,7mmbox10

Knife gravers No. 558

Knife gravers No. 558
Item No.sizeThickness of back in mmpackagingunit
4055801011,75box10
4055803032,25box10
4055805053box10

Set of gravers in case No. 571

Set of gravers in case No. 571

30 gravers of the most popular types with handles, in case
6 Flat edge gravers No. 551
5 Round edge gravers No. 552
8 Onglette gravers No. 553
2 Oval gravers No. 556
2 Bevel gravers No. 557
2 Knife gravers No. 558
1 Square graver No. 6070
4 Lining gravers No. 573

Item No.
40571000

Flat chisel No. 575

Flat chisel No. 575
Item No.lengthThickness of edge in mmpackagingunit
405750406 "4box10
405750606 "6box10
405750806 "8box10
405751006 "10box10

Gouge Gravers flat No. 582

Gouge Gravers flat No. 582
Item No.lengthThickness of edge in mmpackagingunit
405820604 1/2 "6box10
405820804 1/2 "8box10
405821004 1/2 "10box10

Raw forged punches No. 587

Raw forged punches No. 587

Harden at 780-800°C, quench in saline water, release the thension at 160-200°C

Item No.lengthwidthpackagingunit
405870304 1/2 "3,0 mmbox10
405870404 1/2 "4,0 mmbox10
405870504 1/2 "5,0 mmbox10
405870604 1/2 "6,0 mmbox10
405870804 1/2 "8,0 mmbox10

Pearl and ornament punches No. 592

Pearl and ornament punches No. 592

square handle 6mm, set of 10 pieces

Item No.lengthpackagingunit
405920004 "set1

Square Gravers No. 600

Square Gravers No. 600

length without tang 110mm, up to 3,5mm polished, 4mm upwards sand blasted

Item No.widthpackagingunit
406002002,0 mmbox10
406002502,5 mmbox10
406003003,0 mmbox10
406004004,0 mmbox10

Gravers for rollers No. 608

Gravers for rollers No. 608
Item No.sizeAnglepackagingunit
40608020260°box10
40608030370°box10
40608040480°box10
40608050590°box10
Sitemap

We would be happy to receive your feedback on our website. We are open for requests, ideas or suggestions.